Boogie Bones | Halloween Garage Door Cover

Absolutely! Installing your GarageBuddy cover is easy as pie. No tools needed, and clear instructions are included in every package.

Just clean the top of your garage door first, and iron the back of the cover on medium heat before installing.

Absolutely. GarageBuddy covers are made specifically for residential garage doors.

Starting August 2025, all covers come with pre-attached, adjustable elastic bands that flex with your garage door as it opens and closes — without getting in the way.

So now, installation is even easier.

It shouldn't if done properly. Our velcro is designed to come off cleanly if you heat it up using a hair dryer to soften the adhesive and peel it off slowly. Remove any residue with Goo Gone.

However, if you want to keep Velcro hidden, try our: Hidden Velcro Method- place it on the very top front face of the door (the part that tucks under the rubber seal when closed) so it’s out of sight, protected from the elements, and ready to reuse next time.

If your door was recently painted, wait until the paint is fully cured before applying Velcro.

For the best fit, match your banner size as closely as possible to your garage door’s width and height.

If you’re between sizes, go slightly smaller for width to keep it snug without bunching, and slightly taller for height (by 2–3 inches) so you can place the velcro higher or on the top edge of the door.

👉 Check our full Size Guide here for exact measurements and tips.

Some designs come in two versions—regular and “(Glow)”. They look the same in daylight, but the Glow version is printed with special UV-reactive neon inks that light up under blacklight, which you can buy👉 HERE. Perfect for nighttime displays and spooky vibes! 👻

So if you see the same design twice—like “Boogie Bones” and “Boogie Bones (Glow)”—don’t worry, it’s on purpose. One’s a standard print, and the other brings your garage to life in the dark under black light.

Yes, with the new lighter installation method, Garagebuddy covers can be installed on the roller doors as well.

GarageBuddy covers are designed to fit standard residential garage doors, but the exact dimensions vary by the door type. Our most common sizes are:

• 8x7: Approximately 82 x 94 inches
• 16x7: Approximately 82 x 188 inches

Each cover is intentionally made a bit smaller than the full door size to ensure a snug, clean fit without overhang. There may be a small margin around the edges, but the final look is bold, centered, and impressive.

Please note: minor size variations may occur depending on how the fabric is handled during measuring, as slight tension or looseness can affect the result.

It depends.

Our covers are designed to fit standard garage door sizes listed in the dropdown. Each one comes with pre-attached, adjustable elastic bands on the bottom corners, with hooks that easily latch onto the rear hinge of your garage door.

The adjustable length allows for a secure fit without overstretching. If you're using a slightly larger door, it can work — there may be some space left on the edges, which is fine and can be balanced out by adjusting the covers position when fixing the velcro. This is a fairly common practice among people with larger doors.

We ship globally, and the average delivery time is around nine to eighteen days, depending on the country and location. Despite the busy season, we're trying our best to print, pack, and ship even quicker.

Absolutely. Our covers are made out of washable polyester fabric. You can wash them like any other garment you have. But we recommend washing it separately.

No, we don't! We do not have any authorized retailers, websites or resellers. We only sell through GarageBuddy.com. Beware of websites that copy our designs and name to scam people.