A Christmas garage door cover makes holiday decorating quick and simple. But what should you do with it when the season ends?
Learning how to store a Christmas garage door cover properly can make next year's setup easier. Wash it correctly, let it dry completely, fold it neatly, and keep it in the included storage bag.
With the right Christmas garage door cover storage routine, your GarageBuddy cover can be ready for the next holiday season.
Quick Answer: How to Store a Christmas Garage Door Cover
To store a Christmas garage door cover, first remove it carefully from the garage door. Unhook the adjustable bottom bands from the second hinge. Then detach the cover from the Velcro.
Wash the cover separately on a cold, gentle cycle with mild detergent. Air drying is preferred, but you can also tumble dry it on low heat. Make sure the cover is completely dry before storage.
Fold it neatly without creating tight, deep creases. Then place it in the included storage bag and keep it in a clean, dry location.
Step 1: Remove Your Christmas Garage Door Cover Carefully
The first step in Christmas garage door cover storage is taking the cover down carefully.
Start by unhooking the adjustable bottom bands from the second hinge inside the garage. GarageBuddy covers use adjustable elastic bands that allow the cover to flex as the garage door opens and closes.
The bottom bands and hooks are pre-attached to the cover. You do not need to remove them from the cover.
Next, detach the top of the cover from the Velcro.
Take your time during removal. Avoid pulling hard on the cover or its attached bands. Keeping the cover and loose accessories together will make installation easier next season.
Step 2: Check the Cover Before Storage
Before you store your Christmas garage door cover, inspect it.
Check the cover for:
-
Dirt or debris
-
Moisture
-
Visible marks
-
Damage
-
Any loose accessories
If the cover is damp, make sure it is completely dry before putting it away.
Proper garage door cover storage starts with a clean and dry cover.
Step 3: Wash Your Christmas Garage Door Cover Correctly
Cleaning your cover before storage helps prepare it for the next season.
GarageBuddy covers are made from washable polyester fabric. Follow these care instructions:
-
Wash separately
-
Use a cold, gentle cycle
-
Use mild detergent
-
Air dry when possible
-
If using a dryer, tumble dry on low heat
-
Make sure the cover is completely dry before storing it
Following these steps can help you prepare your Christmas garage door cover for storage without using unnecessarily harsh cleaning methods.
If you want to remove wrinkles before the next installation, iron the back side only on medium heat. Do not iron directly on the printed front.
Step 4: Dry the Cover Completely
Drying is an important part of Christmas garage door cover storage.
After washing, air drying is preferred. You can also tumble dry the cover on low heat if needed.
Before folding the cover, make sure it is completely dry.
Do not place a damp cover into the storage bag. Moisture trapped during storage can create problems for the fabric.
Step 5: Fold the Christmas Garage Door Cover Neatly
Once the cover is completely dry, fold it neatly for storage.
Avoid creating tight, deep creases. Do not aggressively crumple or stuff the fabric into a small space.
A neat fold makes storing a Christmas garage door cover easier. It also makes the cover easier to handle when you take it out next season.
The adjustable bottom bands and hooks are pre-attached to the cover. Leave them in place during storage and make sure they are not tangled.
Step 6: Store the Cover in the Included Bag
One of the easiest ways to organize Christmas garage door cover storage is to use the included storage bag.
GarageBuddy recommends storing and reusing the cover in the included cloth bag between seasons.
Keep the cover and loose accessories together in the bag. Depending on the product, the package includes:
-
Garage door cover with pre-attached bottom hooks/bands
-
Velcro strips
-
Storage bag
-
Instruction manual
The bottom hooks and bands are already attached to the cover, so you do not need to remove or separately store them.
Keeping the loose items together makes next season's installation easier.
Step 7: Choose a Dry Storage Location
Where you store your Christmas garage door cover matters.
Choose a clean, dry location for the storage bag. A closet shelf or another protected storage area can work well.
If you store the cover in your garage, keep it away from areas exposed to moisture.
The goal is simple: keep the cover dry and protected until the next holiday season.
What Should You Do With the Velcro?
Whether you remove the Velcro depends on the installation method you used.
GarageBuddy offers a Hidden Velcro Method. With this method, the Velcro is positioned under the upper trim or weather seal. This keeps it out of sight and allows it to be reused.
If you want to remove exposed Velcro, GarageBuddy's Installation Guide recommends warming the adhesive with a hair dryer or heat gun on a low-medium setting. Then slowly peel the Velcro away.
You do not need to remove the Velcro simply because the holiday season has ended.
Common Christmas Garage Door Cover Storage Mistakes
Avoid these common mistakes when you store a Christmas garage door cover.
Storing the Cover While Damp
Always make sure the cover is completely dry before putting it into the storage bag.
Using the Wrong Washing Method
Wash the cover separately on a cold, gentle cycle. Use mild detergent and follow the recommended drying instructions.
Creating Deep Creases
Fold the cover neatly. Avoid tight, deep creases or aggressively crumpling the fabric.
Losing the Loose Accessories
Keep the Velcro strips, instruction manual, and other loose accessories together with the cover.
The bottom hooks and bands are already attached to the cover.
Storing It in a Damp Location
Avoid storage areas that are regularly exposed to moisture. Choose a clean and dry location.
Forgetting the Installation Method
If you used the Hidden Velcro Method, remember that the Velcro may already be positioned for reuse next season.
FAQs About Christmas Garage Door Cover Storage
1. How do I store a Christmas garage door cover?
To store a Christmas garage door cover, remove it carefully, unhook the adjustable bottom bands, and detach the cover from the Velcro. Wash it separately on a cold, gentle cycle with mild detergent. Air dry when possible or tumble dry on low heat.
Make sure the cover is completely dry. Fold it neatly without creating tight, deep creases. Then place it in the included storage bag and store it somewhere clean and dry.
2. Can I reuse my GarageBuddy Christmas garage door cover?
Yes. GarageBuddy's Installation Guide explains that its covers can be reused and stored in the included cloth bag between seasons.
3. Does a GarageBuddy cover come with a storage bag?
Yes. GarageBuddy product information lists a storage bag among the included items for its garage door covers.
4. Should I remove the Velcro when storing my Christmas garage door cover?
Not necessarily. If you use GarageBuddy's Hidden Velcro Method, the Velcro can remain positioned under the upper trim or weather seal for future use.
If you want to remove exposed Velcro, follow GarageBuddy's Installation Guide for the recommended removal method.
5. Where should I store my Christmas garage door cover?
Store your Christmas garage door cover in its included bag in a clean, dry location. If you use a garage for storage, choose an area protected from moisture.
6. How should I clean my GarageBuddy Christmas garage door cover?
GarageBuddy covers are made from washable polyester fabric. Wash the cover separately on a cold, gentle cycle with mild detergent.
Air drying is preferred. You can also tumble dry it on low heat.
Before storage, make sure the cover is completely dry.
7. Can I iron my GarageBuddy Christmas garage door cover?
Yes. If needed, iron the back side only on medium heat. Avoid ironing directly on the printed front of the cover.
8. What should I do with the elastic bands?
The adjustable bottom bands and hooks are pre-attached to the cover, so leave them in place for storage.
Make sure they are not tangled before placing the cover in the storage bag.
9. How should I prepare my cover for next Christmas?
Take the cover out of its storage bag and check it before installation. Make sure the cover and loose accessories are ready.
If needed, follow the recommended care instructions before installation. Then use the GarageBuddy Installation Guide for the correct installation method.
Ready to Store Your Christmas Garage Door Cover?
Proper Christmas garage door cover storage does not need to be complicated.
Remove the cover carefully. Wash it separately using a cold, gentle cycle and mild detergent. Air dry it when possible or tumble dry on low heat.
Make sure it is completely dry before folding. Avoid tight, deep creases and keep the pre-attached bands and hooks in place.
Finally, place the cover and loose accessories in the included storage bag. Store everything in a clean, dry location.
When the next holiday season arrives, your GarageBuddy cover will be ready to use again.
Looking for a new holiday design? Explore GarageBuddy's Christmas Garage Door Cover collection.
For installation instructions, visit the GarageBuddy Installation Guide.
