Choosing the right Christmas garage door cover size starts with knowing your door type. A single door and a double door need very different sizing. Get this wrong, and the cover won't sit flat or fit properly.
This guide breaks down single vs. double garage door sizing, so you can order the right cover the first time.
Quick Answer: Single vs. Double Christmas Garage Door Cover Sizes
Common GarageBuddy size options include 8' x 7' and 9' x 8' for single doors and 16' x 7' and 16' x 8' for double doors, with additional sizes available. If you have two separate garage doors instead of one continuous double door, choose the appropriate multi-door option rather than one continuous double-door cover.
Single Garage Door Covers: What to Know
A single garage door covers one car. This is the simplest layout to size for.
Common single-door cover sizes include:
-
8' x 7'
-
9' x 8'
Additional sizes are also available for less common door dimensions. Measure your door's actual width and height, not the surrounding trim, before ordering.
Double Garage Door Covers: What to Know
A double garage door spans two cars in one continuous panel. There's no support pillar in the middle.
Common double-door cover sizes include:
-
16' x 7'
-
16' x 8'
If your double door looks unusually wide or tall, check the full list of available sizes before assuming the standard options will fit.
How to Tell If You Have One Double Door or Two Single Doors
This distinction trips up a lot of homeowners. Look for a support pillar in the middle of your garage.
If there's a pillar, you actually have two separate single doors. This layout needs the appropriate multi-door option, not one wide double-door cover.
If it's one uninterrupted panel across the full width, it's a true double door. A single continuous cover will work here.
How to Measure for the Right Size
Measuring takes just a few minutes. Follow these steps:
-
Close the garage door completely.
-
Measure the width from edge to edge of the actual door panel.
-
Measure the height from the ground to the top of the panel.
-
Do not include the trim, frame, or weatherstripping.
Compare your numbers to the Size Guide to find your closest match.
What If You're Between Two Sizes?
Garage doors don't always match a standard size exactly. If you're only off by a few inches, a couple of small adjustments can help.
Going slightly smaller in width can help the cover stay snug instead of bunching. Choosing 2 to 3 inches taller in height can also work well. The Velcro can simply be positioned higher on the door.
If your door falls significantly outside standard sizing, reach out to support for help finding the closest match.
Does the Design Look the Same in Every Size?
The core design stays consistent across sizes. The composition is adjusted for each door's proportions, so the artwork fits properly rather than being stretched or cropped.
Check the specific product page to confirm which sizes a design is available in before ordering.
Common Sizing Mistakes to Avoid
A few mistakes come up again and again:
-
Measuring the trim instead of the door panel. This adds false inches to your measurements.
-
Assuming a double door means two single doors. Always check for a support pillar first.
-
Guessing instead of measuring. A quick tape-measure check prevents most sizing issues.
-
Ignoring the available size range. Non-standard doors often still have a matching option.
FAQs
1. What size Christmas garage door cover do I need for a single-car garage?
Common size options for single-car garages include 8' x 7' and 9' x 8'. Measure your exact door panel to confirm the closest match.
2. What size Christmas garage door cover do I need for a two-car garage?
Common size options for a continuous two-car door include 16' x 7' and 16' x 8'. If you have two separate doors instead, choose the appropriate multi-door option.
3. How do I know if my two-car garage has one door or two?
Check for a support pillar in the middle. A pillar means two separate single doors. No pillar means one continuous double door.
4. Can I use a double door cover on two separate single doors?
No. Two separate doors move independently, so a single continuous cover won't fit or function correctly. Choose the appropriate multi-door option instead.
5. What if my garage door doesn't match any standard size?
Compare your measurements to the Size Guide first. Minor differences can often be solved by sizing slightly smaller in width or slightly taller in height.
Ready to Find Your Size?
Knowing your door type is the first step toward the right fit. Check the Size Guide to confirm your measurements. Then browse the Christmas garage door cover collection to find a design in your size. Once your cover arrives, the Installation Guide will walk you through setup.
